AL-ARABIYA is the official Middle East agent for TRILITE—a high-performance family of magnesium building boards engineered for safe, fast and durable construction. Made from mineral components and reinforced with fiberglass mesh, TRILITE boards deliver reliable fire resistance, moisture stability, and clean finishes across commercial, industrial and infrastructure projects.
Why TRILITE
Fire performance – Mineral composition and glass-mesh reinforcement support use in fire-rated wall, ceiling and enclosure systems. (System test reports available on request.)
Moisture & mold resistance – Stable in humid environments; suitable for kitchens, corridors, plant rooms and service areas.
Strong yet workable – High screw-holding and impact resistance with a lighter weight than many cement boards. Can be cut, scored-and-snapped, drilled and fastened with standard tools.
Finishing versatility – Accepts paint, plaster, tiles, veneers and most architectural coatings with excellent surface flatness.
Low emissions – Mineral board with low VOCs for healthier interiors.
Typical Applications
Partitions & ceilings in offices, hospitals, schools, malls and transport hubs.
Fire-rated assemblies such as duct/shaft enclosures, risers, cable-tray covers and steel protection systems as part of tested builds.
External sheathing behind façade glazing, aluminium cladding and stone.
Signage, soffits and decorative panels requiring a stable, smooth substrate.
Installation Overview
Fix to galvanized steel or timber framing with corrosion-resistant screws; select thickness to suit span and fire/sound requirements.
Store flat and dry; acclimatize before installation.
Stagger joints; maintain perimeter and control joints as per design.
Treat joints with compatible tape/compound; prime before finishing.
Seal cut edges and penetrations; observe manufacturer guidance for wet areas and exterior sheathing. (Full method statements and shop drawings available upon request.)
Specs at a Glance (guide values—confirm per project)
Thicknesses
6–20 mm (others on request)
Standard size
1220 × 2440 mm
Edges
Square; factory-sanded faces
Finish
Paint-ready surface; accepts tile/plaster systems
Quality & Compliance
TRILITE boards are produced under controlled processes with fiberglass reinforcement for consistent strength and flatness. Certificates, test summaries and data sheets for fire, moisture and structural performance can be supplied to consultants and authorities during submittals.
Why Partner with AL-ARABIYA
We provide end-to-end support—technical advice, detailing, supply, installation and QA/QC—so your walls, ceilings and enclosures are delivered safely, on time and to spec. From mock-ups to final handover, our team coordinates with the site, consultants and authorities to keep approvals and progress smooth.
